Creating a room that meets the criteria considered class 1000 ( maximum of 1000 particles per cubic foot at 0.3 microns) usually requires special construction and an air handler system that includes HEPA filters and a motor/blower system capable of moving 2,000 CFM or higher of filtered air in a positive pressure environment. This design is both expensive and takes a fair amount of time to construct.
Using one of the larger HEPA Shield systems, made by Pure Air Systems, would provide a system that could be easily convert any room into a clean room or temporary surgery suite. The 2000HS unit comes with a 1HP programmable, variable speed drive motor, prefilter, carbon media filter and true, commercial grade 99.99% scanned HEPA Filter. The 2,000 CFM unit can be placed in the ceiling area or along the top of a wall attached to sections of sheet metal ductwork with diffusers located in various parts of the ceiling area. When the unit is operational it will be pushing 2,000 CFM of filtered air into the enclosed space. This will pressurize the room so that when a door is opened into the room the air will move out of the room creating a positive pressure seal of sorts. In this way no airborne contaminants are allowed to enter the room.
This concept has been used in third world countries where almost any building can be turned into a quasi-clean room or semi-surgery suite for under $3,000.00. In addition, all of the filtration systems from Pure Air Systems are rated at 120/240Volt 50.60Hz.making them suited for any location anywhere in the world.
For more information on the complete line of HEPA and Carbon based air filtration systems, please go to our website at: http://www.pureairsystems.com or call us on our toll-free number at: 800-869-8025.
About the Author: Don Musilli
My name is Don Musilli. I started Pure Air Systems in 1985 and then sold it in 2006. I continue to consult for PAS and write their blog and control their Twitter account. I also, on occasion, make changes to the website. The company is now almost 26 years old and has been a major player in offering commercial grade, high performance HEPA and Carbon based filtration systems for the commercial, institutional, industrial and residential markets.
I currently reside in Englewood, Florida where I write blogs and do social media marketing for a number of clients.
Stay In The Loop
- Tobacco Road November 27, 2021
- Filtration For Your 3D Printer November 23, 2021
- If You Expect To Rate As A Gentlemen Don’t Expectorate On The Floor November 3, 2021
- Creating The Portable Clean Room October 17, 2021
- Gaseous Pollutants Reduction and/or Removal September 29, 2021
Contact our team of specialists now.