Many products that used to be fabricated from metal are now made by using an injection molding process and a wide variety of plastics to keep the cost and weight down. In many cases this option works as the strength of many of the composite plastics are very strong and will work for most applications.
In 1985 Pure Air Systems began its process of making fan powered, commercial grade, HEPA air filtration systems for both the residential and commercial markets. The cabinets used to house the filter components was mild steel that was powder coated. These rugged housings allowed for the use in both interior and exterior applications and provided a housing structure that would last 20 years or longer under heavy use.
The housings ranged in size from the small portable which is approximately 13 inches square by 21 inches long, the 600HS series which is 16 inches square by 34 inches long ( high ), The 1200 HS series which is 25 inches square by 48 inches long and the 2000HS series which is identical to the 1200HS in size. All of these units are fabricated from 16 gauge powder coated steel and are built to last.
Early in the 90’s. Pure Air Systems looked at the possibility of using strong, composite plastic materials in-lieu of metal housings but found both the cost and challenge of making a unit strong enough to hold the metal blowers, ECM motors and HEPA filter and associated prefilter material. In this case, metal was and has always been the best choice for making the high performance HEPA based air filtration systems.
For more information on the complete line of HEPA and Carbon filters go to our website at: http://www.pureairsystems.com or call us on our toll-free number. 800-869-8025.
About the Author: Don Musilli
My name is Don Musilli. I started Pure Air Systems in 1985 and then sold it in 2006. I continue to consult for PAS and write their blog and control their Twitter account. I also, on occasion, make changes to the website. The company is now almost 26 years old and has been a major player in offering commercial grade, high performance HEPA and Carbon based filtration systems for the commercial, institutional, industrial and residential markets.
I currently reside in Englewood, Florida where I write blogs and do social media marketing for a number of clients.
Stay In The Loop
- HEPA Systems For New Intel Chip Manufacturing Facilities May 9, 2022
- Removing Airborne Gaseous Pollutants April 13, 2022
- Covid and the Mask Issue March 21, 2022
- Chevrolet Nova – A Car After It’s Time March 7, 2022
- House of The Rising Sun February 19, 2022
Contact our team of specialists now.