Pure Air Systems was founded in 1985 and at that time the electric motors used in their HEPA based air filtration systems were typical wound motors. These motors were only capable of running either at one speed, or 3 speeds if adjusted to the speed controller. They were also either 120 volt, 60 Hz or 240 volt, 50Hz.
In 1998, PAS along with General Electric, started to play with the new ECM, variable speed drive motors that were magnet driven and not the typical induction motors used in the past. These new motors could run forwards, backwards and could controlled to run at 1% of power up to 100% of power in 1 percent increments. And, they were rated from 1/3rd HP up to 1 HP using the same base unit but by changing the drive add-on could be changed from 1/3rd HP or 1/2 HP to 3/4 or 1 HP simply by changing the controller section.
In addition, by using digital controllers, the customers had the ability to change the speed of the motors and the level of filtration from any location in the room or proximate to the filter systems. These units could also be programmed to operate on a pressure differential basis so as to speed up the fan motor when the HEPA filters started to load up and create more static load. This allowed for continuous speeds throughout the life cycle of the HEPA filter.
The newer versions of these motors now allow for complete programing functions either from the factory or by the end user with some minor education by the factory. These newer motors, like the original variable speed drive motors, are now 120/240 50/60Hz so they can easily be adapted to working anywhere in the world. These new motors are used on the complete line of HEPA based air filtration systems offered by PAS. Models, 600HS, 1200HS, 2000HS, and the HPS Portable HEPA filter systems.
For more information on the complete line of HEPA and Carbon based air filtration systems please go to our website at http://www.pureairsystems.com or call us on our toll-free number at 800-869-8025.
About the Author: Don Musilli
My name is Don Musilli. I started Pure Air Systems in 1985 and then sold it in 2006. I continue to consult for PAS and write their blog and control their Twitter account. I also, on occasion, make changes to the website. The company is now almost 26 years old and has been a major player in offering commercial grade, high performance HEPA and Carbon based filtration systems for the commercial, institutional, industrial and residential markets.
I currently reside in Englewood, Florida where I write blogs and do social media marketing for a number of clients.
Stay In The Loop
- Variable Speed Drive Motors Power Pure Air Systems HEPA Units November 21, 2022
- How To Do Factual Research November 4, 2022
- Closing In On Airborne Mold October 23, 2022
- Comparing UV to HEPA Filters October 12, 2022
- Carbon For Odor Control August 30, 2022
Contact our team of specialists now.