Installing Pure Air Systems Filtration Systems On Horizontal HVAC Units

Pure Air Systems has been manufacturing fan powered, HEPA based, commercial grade air filtration systems since 1985. With seven models to choose from PAS offers a system for any application in the residential, commercial, institutional, medical or industrial markets. Their systems can be attached to any type of ducted HVAC system or used in a stand-alone configuration.

Traditionally, the 600HS Plus L version was used on only up-flow HVAC systems located in a garage or basement. In some parts of the country, specifically areas of the South where there are no basements ( i.e. Florida ) a horizontal air handler is utilized. This makes is somewhat challenging to install the 600 HS L version as it can not connect to the return air side of the air handler due to the configuration. The PAS “S” version is a straight thru unit that could be mounted above the or to the side of the horizontal air handler or even in the attic area where space is available. 

Like the L version of the 600HS, the “S” version is split into two symmetrical sections so you can rotate the discharge and inlet access doors to one of four positions thus allowing for installation anywhere so you always have access to the blower/motor and filter sections. The 600HS model produces 600 CFM of HEPA filtered air using a 1/3 HP variable speed drive motor. There is also a 1200HS Plus version, producing 1200 CFM of air and a 2000HS Plus version, producing 2,000 CFM of air. All of these units come in either the L or S versions. And, they can be wired to either connect to the HVAC system or use a digital speed controller to run the units manually from 1% to 100% in 1% increments for specific air flow requirements.

For more information on the complete line of air filtration systems please go to our newly revised website at: http://www.pureairsystems.com    or call us on our toll-free number at: 800-869-8025.

        

 

Open Post